Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 4 руководства, которые включают этот шаг.

Английский
Французский
Шаг 8
Once you're satisfied that the top half of the adhesive strip is neatly aligned, peel longer blue piece of backing out from behind the strip. If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top. If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.
  • Once you're satisfied that the top half of the adhesive strip is neatly aligned, peel longer blue piece of backing out from behind the strip.

  • If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.

Une fois que la moitié supérieure de la bande adhésive est parfaitement alignée, retirez le long film bleu derrière la bande.

Si la moitié supérieure n'est pas correctement alignée, vous pouvez la décoller soigneusement et la recoller avant de décoller le film. Assurez-vous d'utiliser la pointe de la spatule pour aligner le haut.

Ваш вклад лицензируется под свободной лицензией Creative Commons.