Перейти к основному содержанию

Sostituzione strisce adesive dello schermo iMac Intel 21.5"

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 8 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 2
iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the old adhesive: шаг 0, изображение 1 из 2 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the old adhesive: шаг 0, изображение 2 из 2
Remove the old adhesive
  • Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure.

  • If you are re-using your existing display, you must also remove the old adhesive from the back of the display.

  • Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel upward towards the top of the device.

  • After all the old adhesive is removed, carefully clean off the adhesive residue with high-concentration isopropyl alcohol (90% or greater) and a lint-free cloth. Wipe in one direction, not back and forth.

  • Don't skip this step, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

Prima di installare le nuove strisce adesive, rimuovi tutto l'adesivo originale dal perimetro della cornice.

Se stai reinstallando lo schermo originale, dovrai rimuovere l'adesivo originale anche dal retro dello schermo.

Rimuovi l'adesivo originale usando delle pinzette o le dita. Inizia sulla parte inferiore e tiralo verso l'alto, verso la parte superiore del dispositivo.

Dopo aver rimosso tutto l'adesivo originale, pulisci attentamente i residui di adesivo con dell'alcool isopropilico ad alta concentrazione (>90%) e un panno senza lanugine. Fai scorrere il panno in una sola direzione, non in avanti e indietro.

Non saltare questo passaggio, o il tuo nuovo adesivo non si incollerà correttamente e lo schermo dell'iMac potrebbe cadere.

Ваш вклад лицензируется под свободной лицензией Creative Commons .