Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 13 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 22
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it. Repeat this step with the other adhesive strip and remove it.
Remove the remaining adhesive
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

小心不要接触电源背面的电容器引线或任何暴露的焊点(红色框)。

抓住底部边缘显示屏胶带之一末端的小标签,然后将粘合剂拉向 iMac 的顶部以将其取下。

用另一条胶带重复此步骤并将其取下。

如果任一胶条在取下之前断裂,请使用塑料卡将剩余的胶条切开。

Ваш вклад лицензируется под свободной лицензией Creative Commons.