Перейти к основному содержанию
Английский
Итальянский
Шаг 6
Almost there! Time to really go wireless by disconnecting the three WiFi and bluetooth antennas. These are tiny snaps so pull gently upward. Also, sneaking in from underneath, you'll find the iSight camera cable. Unplug it. This is one to look out for when you reinstall the logic board. At last you'll disconnect the main power cord and the Hard Drive SATA cable. I photographed the top one already disconnected; be sure to squeeze the edge tabs to release the clamp hooks. The HDD SATA connector has a convenient pull tab. At last you'll disconnect the main power cord and the Hard Drive SATA cable. I photographed the top one already disconnected; be sure to squeeze the edge tabs to release the clamp hooks. The HDD SATA connector has a convenient pull tab.
  • Almost there! Time to really go wireless by disconnecting the three WiFi and bluetooth antennas. These are tiny snaps so pull gently upward. Also, sneaking in from underneath, you'll find the iSight camera cable. Unplug it. This is one to look out for when you reinstall the logic board.

  • At last you'll disconnect the main power cord and the Hard Drive SATA cable. I photographed the top one already disconnected; be sure to squeeze the edge tabs to release the clamp hooks. The HDD SATA connector has a convenient pull tab.

Quasi finito! Saremo veramente senza fili, scollegando le tre antenne del WiFi e del Bluetooth. Questi sono dei connettori a pressione, da tirare delicatamente verso l'alto. Inoltre, sbucando dal retro, troverai il cavo della fotocamera iSight. Scollegalo. Questo è uno di quelli a cui stare attenti durante la reinstallazione della scheda madre

Alla fina scollega il cavo dell'alimentazione e il cavo SATA del disco rigido. Ho fotografato quello sopra già scollegato: assicurati di premere le alette laterali per rilasciare i ganci a morsetto. Il connettore SATA del disco rigido ha una comoda aletta per tirarlo.

Ваш вклад лицензируется под свободной лицензией Creative Commons.