Перейти к основному содержанию
Английский
Итальянский
Шаг 10
The graphics card is retained by two T-9 (2mm x 5mm) torx screws on the GPU board... a third T-9 (2mm x 4mm) screw on the end of the heat sink... and the ever-present thermal sensor connector.
  • The graphics card is retained by two T-9 (2mm x 5mm) torx screws on the GPU board...

  • a third T-9 (2mm x 4mm) screw on the end of the heat sink...

  • and the ever-present thermal sensor connector.

  • Remove/disconnect them all.

La scheda grafica fissata da due viti Torx T9 da 2 mm x 5 mmalla scheda grafica...

...una terza vite Torx T9 da 2 mm x 4 mm alla fine del dissipatore...

...e un sempre presente connettore del sensore della temperatura.

Rimuovi/scollega tutto.

Ваш вклад лицензируется под свободной лицензией Creative Commons.