Почините Свои Вещи Сообщество Магазин

iPhone 12 前置摄像头

Английский
Китайский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 12 五角螺丝更换

三角撬片深度标记

iPhone 12显示屏总成更换

Информационный справочник

= Готово = Не завершен
    Use this guide to remove and replace the front camera assembly (a.k.a. selfie cam) in an iPhone 12.

     Note that if***Note:*** If you replace this part, '''***Face ID will no longer work'''***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''To reassemble your device, follow the above steps in reverse order.'''
      ***To reassemble your device, follow the above steps in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→*** About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012|iPhone 12 Answers community] for help.

      Шаги руководства

      Шаг 1 — 拧下前置摄像头组件

      使用 Y000 螺丝刀拆下固定前置摄像头组件的1 mm长螺丝。

      Шаг 2 — 移除前置的相机支架

      抬起并取下前置摄像头支架。

      Шаг 3 — 断开前置摄像头组件

      使用撬棒或指甲将面部ID点投影仪电缆与主板上的插座断开。

      Шаг 4

      使用撬棒或指甲将面部ID传感器电缆与主板上的插座断开。

      Шаг 5

      轻轻推动面部ID电缆连接器远离主板以接触到下面的自拍摄像头接口。

      Шаг 6 — 拆下前置的摄像头组件

      拆下面向前置摄像头组件。

      Ваш вклад лицензируется под свободной лицензией Creative Commons .