Почините Свои Вещи Сообщество Магазин

Sostituzione fotocamere frontali iPhone 12 Pro Max

Английский
Итальянский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

Sostituzione viti pentalobe iPhone 12 Pro Max

Segna i tuoi plettri di apertura a 3 mm

Sostituzione gruppo dello schermo iPhone 12 Pro Max

Информационный справочник

= Готово = Не завершен
    Use this guide to remove and replace the front camera assembly (a.k.a. selfie cam) in an iPhone 12 Pro Max.

     Note that if***Note:*** If you replace this part, '''***Face ID will no longer work'''***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow the above steps in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20Pro%20Max|iPhone 12 Pro Max Answers community] for help.

      Шаги руководства

      Шаг 1 — Disconnetti il gruppo della fotocamera frontale

      Usa uno spudger o un'unghia per disconnettere il cavo del sensore Face ID dal suo zoccolo sulla scheda logica.

      Шаг 2

      Usa uno spudger o un'unghia per disconnettere il cavo del proiettore di punti del Face ID dal suo zoccolo sulla scheda logica.

      Шаг 3

      Sposta delicatamente i connettori dei cavi del Face ID lontano dalla scheda logica per avere accesso al connettore della fotocamera frontale sotto di essi.

      Шаг 4 — Rimuovi il gruppo fotocamera frontale

      Rimuovi il gruppo fotocamera frontale.

      Ваш вклад лицензируется под свободной лицензией Creative Commons .