Почините Свои Вещи Сообщество Магазин

iPhone 12 Pro Max 전면 카메라 교체

Английский
Корейский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 12 Pro Max Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 12 Pro Max 디스플레이 어셈블리 교체

Информационный справочник

= Готово = Не завершен
    Use this guide to remove and replace the front camera assembly (a.k.a. selfie cam) in an iPhone 12 Pro Max.

     Note that if***Note:*** If you replace this part, '''***Face ID will no longer work'''***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''To reassemble your device, follow the above steps in reverse order.'''
      ***To reassemble your device, follow the above steps in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20Pro%20Max|iPhone 12 Pro Max Answers community] for help.

      Шаги руководства

      Шаг 1 — 전면 카메라 어셈블리 분리하기

      Spudger/스퍼저 또는 손톱을 사용하여 Face ID 센서 케이블을 로직 보드 소켓에서 분리하세요.

      Шаг 2

      Spudger/스퍼저 또는 손톱을 사용하여 Face ID 도트 프로젝터 케이블을 로직 보드 소켓에서 분리하세요.

      Шаг 3

      Face ID 케이블 커넥터를 로직 보드에서 멀리 살살 밀어 아랫면의 셀카 캠 커넥터에 접근하세요.

      Шаг 4 — 전면 카메라 어셈블리 분리하기

      전면 카메라 어셈블리를 분리하세요.

      Ваш вклад лицензируется под свободной лицензией Creative Commons .