Перейти к основному содержанию

iPhone 13 Pro 五角螺钉更换

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 6 руководства, которые включают этот шаг.

Английский
Китайский

Перевод шага 1

Шаг 1
iPhone 13 Pro Pentalobe Screws Replacement, Remove the pentalobe screws: шаг 0, изображение 1 из 1
Remove the pentalobe screws
  • Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 6.8 mm-long pentalobe P2 screws at the bottom edge of the iPhone.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

注意:在开始之前,请将 iPhone 电池电量降至 25% 以下。如果意外刺破,充电的锂离子电池可能会着火和/或爆炸。

在开始拆卸之前关闭 iPhone。

卸下 iPhone 底部边缘的两颗 6.8 毫米长的五角 P2 螺丝。

打开 iPhone 的显示屏会破坏其防水密封。在继续执行此步骤之前准备好更换密封件,或者如果你在未更换密封件的情况下重新组装 iPhone,请注意避免接触液体。

Ваш вклад лицензируется под свободной лицензией Creative Commons .