Перейти к основному содержанию

iPhone 13 Pro Max スクリーンの交換

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 2 руководства, которые включают этот шаг.

Английский
Японский

Перевод шага 1

Шаг 1
iPhone 13 Pro Max Screen Replacement, Tape over any cracks: шаг 0, изображение 1 из 3 iPhone 13 Pro Max Screen Replacement, Tape over any cracks: шаг 0, изображение 2 из 3 iPhone 13 Pro Max Screen Replacement, Tape over any cracks: шаг 0, изображение 3 из 3
Tape over any cracks
  • If your iPhone has a cracked screen, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the iPhone's screen until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the screen.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

  • If you can't get the suction cup to stick in the next few steps, fold a strong piece of tape (such as duct tape) into a handle and lift the screen with that instead.

  • If all else fails, you can superglue the suction cup to the screen.

iPhoneの画面が割れてしまった場合、ガラスをテーピングで覆えば、さらなる破損の広がりを抑えることができます。また修理中に発生するアクシデントを防ぐことができます。

iPhoneの画面全体に、透明な梱包用テープを重ね合わせます。

これにより、ガラスの破片を抑えることができ、スクリーンをこじ開けたり持ち上げたりする際の構造的な完全性を確保することができます。

作業中、飛散する可能性のあるガラスから目を保護するため、安全眼鏡を着用してください。

次の手順でうまく吸盤が装着しない場合は、強力なテープ(ガムテープなど)を持ち手に折って、代わりにスクリーンを持ち上げてみてください。

それでもうまくいかない場合は、吸盤カップに瞬間接着剤をつけて、スクリーン上に貼り付けてください。

Ваш вклад лицензируется под свободной лицензией Creative Commons .