Перейти к основному содержанию

Steam Deck Vervanging van de linker knoppenkaart

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 8 руководства, которые включают этот шаг.

Английский
Голландский
Шаг 2
Steam Deck Left Button Board Replacement, Remove the thumbstick screws: шаг 0, изображение 1 из 2 Steam Deck Left Button Board Replacement, Remove the thumbstick screws: шаг 0, изображение 2 из 2
Remove the thumbstick screws
  • Use a Phillips driver to remove the three 5.2 mm screws securing the thumbstick.

  • During reassembly, you may need to hold the Steam Deck off of the work surface so it isn't resting on the new thumbstick while you tighten down the screws.

Gebruik een kruiskopschroevendraaier om de drie 5.2 mm lange schroeven, waarmee de duimpook is bevestigd, te verwijderen.

Bij het weer in elkaar zetten van je Steam Deck kan het nuttig zijn om je toestel iets van je werkoppervlak op te tillen zodat deze niet op de nieuwe duimpook rust bij het aandraaien van de schroeven in de duimpook.

Ваш вклад лицензируется под свободной лицензией Creative Commons .