iPhone SE 2022 LCD 및 디지타이저 교체

Английский

Корейский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone SE 2022 Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

수리를 위하여 iPhone SE 2022 여는 법

iPhone SE 2022 배터리 분리하는 방법

iPhone SE 2022 디스플레이 어셈블리 분리 방법

iPhone SE 2022 홈/Touch ID 센서 교체

iPhone SE 2022 이어피스 스피커 교체

iPhone SE 2022 전면 카메라 및 센서 케이블 교체

Информационный справочник

= Готово = Не завершен

Какую деталь вы заменяете?

Название

Введение

Use this guide to fix a cracked or broken screen by replacing just the bare front panel, a.k.a. LCD and digitizer assembly, in the iPhone SE 2022.

This guide was performed on the ***A2783*** (international) model.

If the frame is deformed, it's important to replace it to make sure the new screen will mount correctly and won’t suffer damage from uneven pressure

This guide shows how to replace ''only'' the iPhone SE 2022 LCD and digitizer assembly (a.k.a. the bare “front panel”). This requires you to transfer several components from your original screen to the new one before installing it—including the front-facing camera, earpiece speaker, LCD shield plate, and home button assembly.

***In order to maintain Touch ID functionallity it's important to carefully transfer the original home/Touch ID sensor onto the new display.*** The solid-state home button is paired to its original logic board by Apple, so replacing it will render it unusable.

If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection.

You’ll need replacement adhesive to reattach components when reassembling the device.

Заключение