Phone SE 2022 LCD 和触摸屏

Английский

Китайский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone SE 2022 五角螺丝替换

三角撬片深度标记

如何拆开iPhone SE 2022以进行维修

如何断开 iPhone SE 2022 的电池连接

如何卸下 iPhone SE 2022屏幕组件

iPhone SE 2022 Home键/Touch ID 传感器替换

iPhone SE 2022 听筒替换

iPhone SE 2022前置摄像头和传感器排线更换

Информационный справочник

= Готово = Не завершен

Какую деталь вы заменяете?

Название

Введение

Use this guide to fix a cracked or broken screen by replacing just the bare front panel, a.k.a. LCD and digitizer assembly, in the iPhone SE 2022.

This guide was performed on the ***A2783*** (international) model.

If the frame is deformed, it's important to replace it to make sure the new screen will mount correctly and won’t suffer damage from uneven pressure

This guide shows how to replace ''only'' the iPhone SE 2022 LCD and digitizer assembly (a.k.a. the bare “front panel”). This requires you to transfer several components from your original screen to the new one before installing it—including the front-facing camera, earpiece speaker, LCD shield plate, and home button assembly.

***In order to maintain Touch ID functionallity it's important to carefully transfer the original home/Touch ID sensor onto the new display.*** The solid-state home button is paired to its original logic board by Apple, so replacing it will render it unusable.

If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection.

You’ll need replacement adhesive to reattach components when reassembling the device.

Заключение