Перейти к основному содержанию

iPhone SE 2022のロジックボードの接続を外す方法

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 2 руководства, которые включают этот шаг.

Английский
Японский
Шаг 2
How to disconnect the Logic Board in the iPhone SE 2022, Unfasten the rear camera bracket screws: шаг 0, изображение 1 из 1
Unfasten the rear camera bracket screws
  • Remove the two screws securing the rear-facing camera bracket:

  • One 3.0 mm-long standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One 3.1 mm-long Phillips screw

リアカメラブラケットを固定している2本のネジを外します。

長さ3.0 mmスタンドオフネジー1本

スタンドオフネジはスタンドオフドライバーで外すのが最適です。

持ち合わせていない場合はマイナスドライバーでも対応できますが、周辺のパーツを破損しないようにご注意ください。

長さ3.1 mmプラスネジー1本

Ваш вклад лицензируется под свободной лицензией Creative Commons .