MacBook Pro 16" 2021 MagSafe Port Replacement

Английский

Голландский

Перевод шага 1

Шаг 1

Unfasten the MagSafe port

Use a 2IP Torx Plus driver to loosen (don't remove) the two MagSafe Port set screws a few turns above the frame.
In a pinch, you can use a standard T2 Torx driver to loosen these screws. Make sure to apply constant, downward force to prevent stripping.
Use a T3 Torx driver to loosen the two 3.7 mm screws enough to unfasten the MagSafe port.
These screws are not magnetic—be careful not to lose them.

Ваш вклад лицензируется под свободной лицензией Creative Commons .