Sustitución del disipador de calor del MacBook Pro de 14" 2021

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 3 руководства, которые включают этот шаг.

Английский

Испанский

Перевод шага 1

Шаг 1

Unfasten the heat sink

Turn the logic board upside-down so that the heat sink screws face upwards.
Use a T5 Torx driver to remove the four 3.9 mm screws securing the heat sink to the logic board.
Gently hold the screws as you remove them, as the tension brackets may eject them.
During reassembly, loosely tighten these screws, then align the brackets and heatsink before fully tightening them in an X-pattern.

	[title] Unfasten the heat sink
-	[* ~~icon_note~~] Turn the logic board upside-down so that the heat sink screws face upwards.
+	[* black] Turn the logic board upside-down so that the heat sink screws face upwards.
	[* red] Use a T5 Torx driver to remove the four 3.9 mm screws securing the heat sink to the logic board.
+	[* icon_caution] Gently hold the screws as you remove them, as the tension brackets may eject them.
+	[* icon_reminder] During reassembly, loosely tighten these screws, then align the brackets and heatsink before fully tightening them in an X-pattern.

Ваш вклад лицензируется под свободной лицензией Creative Commons .