Перейти к основному содержанию

MacBook Pro 14インチ 2021 トラックパッドの交換

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Английский
Японский

Перевод шага 1

Шаг 1
MacBook Pro 14" 2021 Trackpad Replacement, Unfasten the trackpad: шаг 0, изображение 1 из 2 MacBook Pro 14" 2021 Trackpad Replacement, Unfasten the trackpad: шаг 0, изображение 2 из 2
Unfasten the trackpad
  • Use a T5 Torx driver to remove the ten 5.7 mm screws securing the trackpad.

  • Adding a little blue threadlocker to the screw threads during reassembly can help prevent the screws from working themselves loose over time.

  • Install the screws loosely at first, and then check the trackpad alignment before tightening them down.

T5トルクスドライバーを使って、トラックパッドを固定している5.7mmネジを10本外します。

再組み立ての際、ネジ山に青いネジロック剤を少し塗ると、経年変化によるネジの緩みを防止することができます。

ネジは最初軽く装着してください、それからトラックパッドの配置を確認した後、ネジをきつく締めてください。

[title] Unfasten the trackpad
-[* red] Use a T5 Torx driver to remove the ten 5.7 mm screws securing the trackpad:
+[* red] Use a T5 Torx driver to remove the ten 5.7 mm screws securing the trackpad.
[* icon_reminder] Adding a little blue threadlocker to the screw threads during reassembly can help prevent the screws from working themselves loose over time.
[* icon_reminder] Install the screws loosely at first, and then check the trackpad alignment before tightening them down.

Ваш вклад лицензируется под свободной лицензией Creative Commons .