Почините Свои Вещи Сообщество Магазин

Extracción de la placa lógica del MacBook Pro 14" 2021

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 11 руководства, которые включают этот шаг.

Назад к руководству
Английский
Испанский
Предыдущий шаг

Перевод шага 41

Шаг 41
MacBook Pro 14" 2021 Logic Board Replacement, Reassembly information: шаг 0, изображение 1 из 3 MacBook Pro 14" 2021 Logic Board Replacement, Reassembly information: шаг 0, изображение 2 из 3 MacBook Pro 14" 2021 Logic Board Replacement, Reassembly information: шаг 0, изображение 3 из 3
Reassembly information

  • During reassembly, perform the following:

  • Make sure all 18 connectors are above the logic board before securing it back into the frame.

  • If you're having trouble positioning the connectors, use tape to keep them out of the way.

  • Hold the rubber spacers out of the way so the fins can drop into their recesses.

  • When reinstalling the logic board, insert the left side first to reposition the HMDI and SDXC ports.

  • Use your fingers to slightly compress the HDMI port to fit it into its recess. Otherwise, the logic board won't sit correctly.

Información de montaje

Durante el reensamblaje, realiza lo siguiente:

Asegúrate de que los 17 conectores estén por encima de la placa lógica antes de volver a asegurarla en el marco.

Si tienes problemas para colocar los conectores, usa cinta adhesiva para mantenerlos apartados.

Mantén los espaciadores de goma apartados para que las aletas puedan caer en sus huecos.

Al reinstalar la placa lógica, inserta primero el lado izquierdo para reposicionar los puertos HMDI y SDXC.

Usa tus dedos para comprimir ligeramente el puerto HDMI para encajarlo en su hueco. De lo contrario, la placa lógica no se asentará correctamente.

[title] Reassembly information
[* icon_reminder] During reassembly, perform the following:
- [* red] Make sure all 17 connectors are above the logic board before securing it back into the frame.
+ [* red] Make sure all 18 connectors are above the logic board before securing it back into the frame.
[* icon_note] If you're having trouble positioning the connectors, use tape to keep them out of the way.
[* black] Hold the rubber spacers out of the way so the fins can drop into their recesses.
[* black] When reinstalling the logic board, insert the left side first to reposition the [link|https://guide-images.cdn.ifixit.com/igi/Ji3htP6lWQIsg1l6.full|HMDI and SDXC ports|new_window=true].
[* black] Use your fingers to slightly compress the HDMI port to fit it into its recess. Otherwise, the logic board won't sit correctly.

Ваш вклад лицензируется под свободной лицензией Creative Commons .