Перейти к основному содержанию

iPhone X Frontkameraeinheit tauschen

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 12 руководства, которые включают этот шаг.

Английский
Немецкий
Шаг 2
iPhone X Front Camera Assembly Replacement: шаг 0, изображение 1 из 3 iPhone X Front Camera Assembly Replacement: шаг 0, изображение 2 из 3 iPhone X Front Camera Assembly Replacement: шаг 0, изображение 3 из 3
  • The camera cables are lightly adhered to the midframe.

  • Using the tip of a spudger, start at the connector and slide the spudger between the IR camera cable and the case to separate the cable from the case.

  • Repeat for the front camera cable.

Die Kabel der Kamera sind leicht am Mittelrahmen festgeklebt.

Benutze die Spitze eines Spudgers, starte bei dem Stecker und schiebe den Spudger zwischen dem Kabel des Infrarot- Sensors und dem Gehäuse durch, um das Kabel vom Gehäuse zu trennen.

Wiederhole dies beim Frontkamerakabel.

Ваш вклад лицензируется под свободной лицензией Creative Commons .