Перейти к основному содержанию

iPad 9 液晶パネル交換

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 15 руководства, которые включают этот шаг.

Английский
Японский
Шаг 4
iPad 9 LCD Replacement, Battery connector information: шаг 0, изображение 1 из 3 iPad 9 LCD Replacement, Battery connector information: шаг 0, изображение 2 из 3 iPad 9 LCD Replacement, Battery connector information: шаг 0, изображение 3 из 3
Battery connector information
  • These photos show what the battery connector looks like underneath the logic board. Use these photos as a reference while you safely disconnect the battery.

  • Notice that the battery connector has cantilever springs on the logic board that press against the battery contact pads. Since both the logic board and battery are glued down, you'll need to slide something thin and flexible between the contact points to disconnect the battery.

これらの画像は、ロジックボードの下にあるバッテリーコネクタの外観を示しています。これらの画像を参考に、バッテリーを安全に取り外してください。

バッテリーのコネクタは、ロジックボード上にカンチレバースプリングがあり、バッテリーのコンタクトパッドに押し付けられていることに注意してください。ロジックボードとバッテリーの両方が接着されているため、バッテリーを取り外すには、何か薄くて柔軟なものを接点の間に滑らせる必要があります。

Ваш вклад лицензируется под свободной лицензией Creative Commons .