iPad 9 Logic Board Replacement

Английский

Китайский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

Opening Procedure (Prereq)

iPad 9 LCD Replacement

Front Panel Assembly Removal

Upper Component Bracket Removal

iPad 9 Headphone Jack Replacement

iPad 9 Front Camera Replacement

Информационный справочник

= Готово = Не завершен

Какую деталь вы заменяете?

Название

Введение

Use this guide to replace the logic board in your iPad 9 Wi-Fi.

Note: this guide is for the Wi-Fi version only. For the LTE version, click [[Topic:iPad LTE|here|new_window=true]].

***For your safety, discharge the battery below 25% before disassembling your iPad.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].

***The home button's Touch ID sensor is paired to the logic board. In order to retain Touch ID functionality, you'll need to transfer and glue the original home button to the new front panel assembly.***

Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

Заключение