Перейти к основному содержанию

Reemplazo de LCD del iPad 9 LTE

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 16 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 5
iPad 9 LTE LCD Replacement, Reposition the LCD screen: шаг 0, изображение 1 из 3 iPad 9 LTE LCD Replacement, Reposition the LCD screen: шаг 0, изображение 2 из 3 iPad 9 LTE LCD Replacement, Reposition the LCD screen: шаг 0, изображение 3 из 3
Reposition the LCD screen
  • Don't attempt to fully remove the LCD during this step, as it's still connected by a flex cable.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the LCD like a page in a book, lifting near the camera and turning it over the home button end of the frame.

  • Lay the LCD on a clean, soft, lint-free surface to allow access to the display cables.

No intentes retirar completamente la pantalla LCD en este paso, ya que sigue conectada mediante un cable flexible.

Utiliza el extremo plano de un spudger para hacer palanca y sacar la pantalla LCD de su hueco lo suficiente como para agarrarla con los dedos.

Dale la vuelta a la pantalla LCD como si fuera la página de un libro, levantándola cerca de la cámara y girándola sobre el extremo del botón de inicio del marco.

Coloca la pantalla LCD sobre una superficie limpia, suave y sin pelusas para poder acceder a los cables de la pantalla.

Ваш вклад лицензируется под свободной лицензией Creative Commons .