Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Английский
Итальянский
Шаг 3
Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board.  The board is still connected by a connector on the bottom of the board.
  • Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.