Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Procedimiento de apertura

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 17 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 24
Opening Procedure: шаг 0, изображение 1 из 2 Opening Procedure: шаг 0, изображение 2 из 2
  • Be very careful with this step. Take your time, ensure the adhesive is hot and soft, and make sure you separated all of the adhesive with an opening pick. Don't be afraid to stop and reheat.

  • Twist the two opening picks on the left corners of the iPad to lift the digitizer slightly, separating the the last of the adhesive in the process.

  • If there's a significant amount of resistance, reheat the edges and work along them with an opening pick.

Ten mucho cuidado con este paso. Tómate tu tiempo, asegúrate de que el adhesivo está caliente y blando, y comprueba que has separado todo el adhesivo con una púa de apertura. No tengas miedo de parar y volver a calentar.

Gira las dos púas de apertura de las esquinas izquierdas del iPad para levantar ligeramente el digitalizador, separando lo que quede de adhesivo en el proceso.

Si hay mucha resistencia, vuelve a calentar los bordes y trabaja a lo largo de ellos con una púa de apertura.

Ваш вклад лицензируется под свободной лицензией Creative Commons .