Почините Свои Вещи Сообщество Магазин

iPhone 14 Pro Max Front-Facing Camera/전면 카메라 어셈블리 교체

Английский
Корейский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 14 Pro Max Pentalobe 나사 교체하기

여는 픽을 3mm에 표시하기

iPhone 14 Pro Max 스크린 선행 작업

iPhone 14 Pro Max 이어피스 스피커 교체

Информационный справочник

= Готово = Не завершен
    Use this guide to remove or replace the front-facing camera assembly in your iPhone 14 Pro Max.
    This guide was created using the ***A2894*** (international) model. If you're fixing a different iPhone 14 Pro Max model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Note:*** If you replace this part, ***Face ID will no longer work***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Pro+Max|Answers community] for help.

      Шаги руководства

      Шаг 1 — 카메라와 센서 케이블 분리하기

      Spudger/스퍼저를 사용하여 커넥터들을 소켓에서 똑바로 들어 올려서 카메라와 센서 케이블을 분리하세요.

      Шаг 2 — 전면 카메라와 센서 어셈블리 분리하기

      핀셋이나 손가락을 사용하여 전면 카메라와 센서 어셈블리를 분리하세요.

      Ваш вклад лицензируется под свободной лицензией Creative Commons .