Почините Свои Вещи Сообщество Магазин

iPhone 14 Plus 스크린 교체

Назад к руководству
Английский
Корейский
Следующий шаг

Перевод шага 1

Шаг 1
iPhone 14 Plus Screen Replacement, Unfasten the front sensor bracket: шаг 0, изображение 1 из 1
Unfasten the front sensor bracket

  • The remaining steps demonstrate how to transfer the front sensor assembly to a new screen. If your replacement screen comes with the assembly pre-installed, skip these steps.

  • Use a Y000 screwdriver to remove the two 1.4 mm-long screws securing the sensor assembly bracket.

전면 센서 브래킷 풀기

나머지 단계는 전면 센서 어셈블리를 새 스크린으로 옮기는 방법을 보여줍니다. 교체용 스크린에 조립품이 사전 설치된 상태로 제공된다면 이 단계를 건너뛰세요.

Y000 스크루드라이버를 사용하여 센서 어셈블리 브래킷을 고정하는 1.4mm-길이 나사 두 개를 풀어주세요.

[title] Unfasten the front sensor bracket
-[* black] The remaining steps demonstrate how to transfer the [link|https://guide-images.cdn.ifixit.com/igi/JoEgSOuSDOLEKDQT.full|front sensor assembly|new_window=true] to a new screen. If your replacement screen comes with the assembly pre-installed, skip these steps.
+[* icon_note] The remaining steps demonstrate how to transfer the [link|https://guide-images.cdn.ifixit.com/igi/JoEgSOuSDOLEKDQT.full|front sensor assembly|new_window=true] to a new screen. If your replacement screen comes with the assembly pre-installed, skip these steps.
[* red] Use a Y000 screwdriver to remove the two 1.4 mm-long screws securing the sensor assembly bracket.

Ваш вклад лицензируется под свободной лицензией Creative Commons .