Почините Свои Вещи Сообщество Магазин

Reemplazo del ensamblaje de la cámara frontal del iPhone 14 Plus

Английский
Испанский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

Reemplazo del tornillo Pentalobe del iPhone 14 Plus

Marca tus púas de apertura a 3 mm

Reemplazo del cristal trasero iPhone 14 Plus

Информационный справочник

= Готово = Не завершен
    Use this guide to remove or replace the front-facing camera assembly in an iPhone 14 Plus.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.

    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Note:*** If you replace this part, ***Face ID will no longer work***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      Шаги руководства

      Шаг 1 — Desengancha el soporte del cable del ensamblaje de la cámara frontal

      Utiliza un destornillador Y000 para retirar los dos tornillos de 1,2 mm de longitud que sujetan el soporte del cable de montaje de la cámara frontal.

      Шаг 2 — Retira la cámara frontal

      Utiliza unas pinzas o tus dedos para retirar el soporte del cable de ensamblaje de la cámara frontal.

      Шаг 3 — Desconecta los cables del sensor y de la cámara

      Desconecta los cables de la cámara y del sensor haciendo palanca con un spudger para sacar los conectores de sus zócalos.

      Шаг 4 — Retira el ensamblaje de la cámara frontal

      Usa un par de pinzas o tus dedos para retirar el ensamblaje de la cámara frontal.

      Ваш вклад лицензируется под свободной лицензией Creative Commons .