Почините Свои Вещи Сообщество Магазин

iPhone 14 Plus 后置摄像头组件替换

Английский
Китайский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

iPhone 14 Pro Max 五角螺丝更换

三角撬片深度标记

iPhone 14 Plus 后壳替换

Информационный справочник

= Готово = Не завершен
    Use this guide to replace the rear-facing camera assembly in an iPhone 14 Plus.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    ***Note***: On iOS 18 and newer, you can calibrate new, genuine camera modules using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      Шаги руководства

      Шаг 1 — 断开后置摄像头连接

      使用撬棒将接口从插座中向上撬开，从而断开两条后置摄像头排线的连接。

      Шаг 2 — 松开后置摄像头螺丝

      使用十字螺丝刀卸下固定后置摄像头的三颗 2.1 毫米长的螺钉。

      Шаг 3 — 撬起后置摄像头组件

      将撬棒的尖端插入后置摄像头组件顶部边缘下方。

      Шаг 4 — 卸下后置摄像头组件

      使用镊子或手指卸下后置摄像头组件。

      Ваш вклад лицензируется под свободной лицензией Creative Commons .