Перейти к основному содержанию

Changement caméras arrière iPhone 14

Английский
Французский

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

Changement vis Pentalobe iPhone 14

Repère de profondeur sur un médiator (prérequis)

Changement vitre arrière iPhone 14

Информационный справочник

= Готово = Не завершен
    Use this guide to replace the rear-facing cameras in your iPhone 14.
    This guide was created using the ***A2882*** (international) model. If you're fixing a different iPhone 14 model, there may be some visual discrepancies, but the procedure should be the same.
    ***Note***: On iOS 18 and newer, you can calibrate new, genuine camera modules using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2014|Answers community] for help.

      Шаги руководства

      Шаг 1 — Déconnecter l'ensemble caméras arrière.

      Utilisez une spatule (spudger) pour déconnecter les deux nappes des caméras arrière, en faisant levier pour retirer les connecteurs tout droit de leurs prises.

      Шаг 2 — Retirer les vis de l'ensemble caméras arrière

      Utilisez un tournevis cruciforme pour retirer les trois vis de 2,1 mm de long qui fixent l'ensemble caméras arrière.

      Шаг 3 — Faites levier pour soulever l'ensemble caméras arrière

      Insérez l'extrémité pointue d'une spatule sous le bord supérieur de l'ensemble caméras arrière.

      Шаг 4 — Retirer l'ensemble caméras arrière

      Utilisez une pincette ou vos doigts pour retirer l'ensemble caméras arrière iPhone 14.

      Ваш вклад лицензируется под свободной лицензией Creative Commons .