Перейти к основному содержанию

iMac Intel 27インチ EMC 2546 ディスプレイ交換

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 44 руководства, которые включают этот шаг.

Английский
Японский
Шаг 10
iMac Intel 27" EMC 2546 Display Replacement: шаг 0, изображение 1 из 3 iMac Intel 27" EMC 2546 Display Replacement: шаг 0, изображение 2 из 3 iMac Intel 27" EMC 2546 Display Replacement: шаг 0, изображение 3 из 3
  • While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, insert a plastic card between the display and frame.

  • Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

開口ツールで作業の大部分は対応できますが、ディスプレイは(完全に剥がれておらず)ケースに若干装着しています。この残りの接着剤を剥がすには、プラスチックカードが必要です。

iMacのスクリーンを上向きに配置します。

iMacの右上コーナーの、ディスプレイとフレームの間にプラスチックカードを挿入します。

3/8 インチ(9.5 mm)以上挿入しないでください。内部のコンポーネントが損傷する可能性があります。

Ваш вклад лицензируется под свободной лицензией Creative Commons .