Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 43 guides that include this step.

Английский
Французский
Step 17
Only lift the display a few inches—it is still attached to the iMac by data and power cables. With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case. If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.
  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

Soulevez l'écran de quelques centimètres seulement, car il est encore relié à l'iMac par les câbles de données et d'alimentation.

Les deux cartes étant insérées près des angles de l'iMac, comme illustré, tournez-les doucement pour élargir l'interstice entre l'écran et le boîtier.

Si l'écran et le boîtier restent collés à certains endroits, utilisez l'une des cartes pour découper la mousse adhésive et les séparer.

Commencez à soulever le haut de l'écran pour le séparer du cadre.

Ваш вклад лицензируется под свободной лицензией Creative Commons.