Перейти к основному содержанию

Rimozione schermo

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 15
Screen Removal, Remove the battery connector cover: шаг 0, изображение 1 из 1
Remove the battery connector cover
  • Use a Y000 screwdriver to remove the three 1.3 mm screws securing the battery connector cover.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working.

Usa un cacciavite Y000 per rimuovere le tre viti da 1,3 mm che fissano la copertura del connettore della batteria.

Durante tutta la riparazione, tieni traccia di ogni vite e assicurati che venga riposizionata esattamente dov'era per evitare di danneggiare il tuo iPhone.

Durante il rimontaggio, questo è un buon momento per accendere l'iPhone e provarne tutte le funzioni, prima di sigillare lo schermo al suo posto. Accertati di spegnere di nuovo l'iPhone prima di continuare a lavorare.

Ваш вклад лицензируется под свободной лицензией Creative Commons .