Перейти к основному содержанию

Rimozione schermo

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 17
Screen Removal, Disconnect the battery: шаг 0, изображение 1 из 3 Screen Removal, Disconnect the battery: шаг 0, изображение 2 из 3 Screen Removal, Disconnect the battery: шаг 0, изображение 3 из 3
Disconnect the battery
  • Use the pointed end of a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Usa la punta di uno spudger per scollegare il cavo della batteria, sollevando il connettore direttamente dalla sua presa sulla scheda madre.

Cerca di non danneggiare il sigillo di silicone nero che circonda questa e altre connessioni sulla scheda. Questi sigilli forniscono un ulteriore protezione contro l'ingresso di acqua e polvere.

Piega leggermente il connettore per allontanarlo dalla scheda logica, per evitare che faccia contatto con la presa e fornisca energia al telefono durante la riparazione.

Ваш вклад лицензируется под свободной лицензией Creative Commons .