Перейти к основному содержанию

Remplacement du haut-parleur gauche de l'iMac Intel 27" EMC 2546

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 33 руководства, которые включают этот шаг.

Английский
Французский
Шаг 2
iMac Intel 27" EMC 2546 Left Speaker Replacement: шаг 0, изображение 1 из 3 iMac Intel 27" EMC 2546 Left Speaker Replacement: шаг 0, изображение 2 из 3 iMac Intel 27" EMC 2546 Left Speaker Replacement: шаг 0, изображение 3 из 3
  • Unplug the left speaker cable by pulling it straight up out of its socket on the logic board.

  • De-route the cable from the gap between the hard drive and logic board.

  • If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.

Débranchez le câble du haut-parleur gauche de sa prise sur la carte mère.

Libérez le câble de l'interstice entre le disque dur et la carte mère.

Si l'espace entre la carte mère et le disque dur est trop étroit pour le câble du haut-parleur, déconnectez-le et laissez-le en place.

Ваш вклад лицензируется под свободной лицензией Creative Commons .