Перейти к основному содержанию

Changement caméra iSight iMac Intel 27" EMC 2546

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 2 руководства, которые включают этот шаг.

Английский
Французский

Перевод шага 1

Шаг 1
iMac Intel 27" EMC 2546 iSight Camera Replacement: шаг 0, изображение 1 из 1
  • Remove two 4.3 mm T5 screws securing the iSight camera board to the top of the rear case.

  • When reinstalling, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear case.

Retirez les deux vis T5 de 4,3 mm qui fixent la puce de la caméra iSight en haut du boîtier arrière.

Lors du remontage, veillez à ne pas trop serrer ces vis. Elles ont de larges épaulements et ne permettent pas de maintenir fermement la puce de la caméra contre le boîtier arrière.

Ваш вклад лицензируется под свободной лицензией Creative Commons .