Перейти к основному содержанию

iPhone 14 Plus 스크린 선행작업

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Английский
Корейский
Шаг 15
iPhone 14 Plus Screen prereq, Unfasten the display connector bracket screw: шаг 0, изображение 1 из 2 iPhone 14 Plus Screen prereq, Unfasten the display connector bracket screw: шаг 0, изображение 2 из 2
Unfasten the display connector bracket screw
  • Use a Y000 screwdriver to remove the the 0.8 mm-long screw securing the display connector bracket.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the screen in place. Be sure to power your iPhone back down completely before you continue working.

Y000 스크루드라이버를 사용하여 디스플레이 커넥터 브래킷을 고정하는 0.8mm-길이 나사를 풀어주세요.

iPhone 손상을 피하기 위하여 수리하는 내내 빼놓은 각각의 나사를 기억하여 원래 자리로 정확히 돌려놓으세요.

재조립 할 때, 디스플레이를 제자리에 봉하기전에 iPhone 전원을 켜고 모든 기능을 테스트하는 것이 좋습니다. 작업을 계속하기 전에 iPhone 전원을 완전히 끄는 것을 잊지마세요.

Ваш вклад лицензируется под свободной лицензией Creative Commons .