Перейти к основному содержанию

iPhone 15 Rückseite aus Glas öffnen

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 9 руководства, которые включают этот шаг.

Английский
Немецкий
Шаг 10
iPhone 15 Plus Back Glass Opening, Separate the bottom right corner adhesive: шаг 0, изображение 1 из 3 iPhone 15 Plus Back Glass Opening, Separate the bottom right corner adhesive: шаг 0, изображение 2 из 3 iPhone 15 Plus Back Glass Opening, Separate the bottom right corner adhesive: шаг 0, изображение 3 из 3
Separate the bottom right corner adhesive
  • Don't insert your pick deeper than 7 mm along the right edge.

  • Rotate your pick around the bottom right corner and slide it halfway up the right edge or until you feel a hard stop at a clip securing the back glass.

  • Don't slice near the volume buttons to avoid damaging the wireless charging cable.

  • Leave this pick inserted to prevent the adhesive from resealing.

Setze das Plektrum an der rechten Seite nicht tiefer als 7 mm ein.

Führe das Plektrum um die untere rechte Ecke herum und schiebe es an der echten Kante bis zur Mitte hin, bis es von einer großen Raste gestoppt wird. Diese Raste befestigt die Rückseite aus Glas.

Schneide nicht nahe bei Lautstärketasten, da sonst das Kabel zur Drahtlos-Ladespule beschädigt werden kann.

Lasse das Plektrum stecken, damit sich der Kleber nicht wieder verbinden kann.

Ваш вклад лицензируется под свободной лицензией Creative Commons .