Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Английский
Итальянский

Translating step 1

Step 1
Use the tip of a spudger to carefully push on each side of the iSight camera cable connector to loosen it out of its socket on the logic board. We recommend you gently "walk" the connector out of its socket.
  • Use the tip of a spudger to carefully push on each side of the iSight camera cable connector to loosen it out of its socket on the logic board.

  • We recommend you gently "walk" the connector out of its socket.

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.