焊接：如何安全连接两根导线

Английский

Китайский

Перевод шага 5

Шаг 5

Apply solder wire

Slowly feed solder wire into the heated wire. The wire strands should readily absorb the molten solder.
If the solder pools on top of the wire strands, the strands aren't hot enough to melt the solder. Try moving the soldering iron so that the tip touches more of the strands.
Feed solder wire along the exposed wire until everything is thinly coated.
Once the molten solder saturates the wire strands, allow the solder joint to cool down and solidify (2-3 minutes).

涂抹焊锡丝

慢慢地将焊锡丝送入加热的电线中。电线股线应能迅速吸收熔化的焊锡。
如果焊料堆积在电线上方，则电线的温度不足以熔化焊料。尝试移动烙铁，让烙铁头接触到更多的电线。
沿着裸露的电线送入焊锡丝，直到所有部分都薄薄地涂上一层。
一旦熔融的焊料浸透了导线，就让焊点冷却并凝固（2-3 分钟）。

Ваш вклад лицензируется под свободной лицензией Creative Commons .