Почините Свои Вещи Сообщество Магазин

Saldare: come unire due cavi in modo sicuro

Назад к руководству
Английский
Итальянский
Предыдущий шаг

Перевод шага 6

Шаг 6
Soldering: How to Safely Join Two Wires, Cover the exposed solder joint: шаг 0, изображение 1 из 3 Soldering: How to Safely Join Two Wires, Cover the exposed solder joint: шаг 0, изображение 2 из 3 Soldering: How to Safely Join Two Wires, Cover the exposed solder joint: шаг 0, изображение 3 из 3
Cover the exposed solder joint

  • Slide the heat-shrink over the exposed solder joint so that it completely covers the joint and the surrounding insulation.

  • The heat-shrink acts as insulation for the wire.

  • Wave a heat source (lighter or heat gun) over the heat-shrink material to activate it. Apply heat until the heat-shrink has shrunk securely around the solder joint.

Copri il giunto di saldatura scoperto

Fai scorrere la guaina termoretraibile sul giunto di saldatura esposto in modo che copra completamente il giunto e l'isolamento circostante.

La guaina termoretraibile funge da isolante per il cavo.

Agita una fonte di calore (accendino o pistola termica) sul materiale termorestringente per attivarlo. Applica il calore fino a quando il termorestringente non si sarà ben ristretto intorno alla lega di saldatura.

Ваш вклад лицензируется под свободной лицензией Creative Commons .