Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.
Перевод шага 5
Шаг 5
-
Remove the following 5 screws and 3 nuts from the heat sink:
-
One 3.5 mm Phillips from the lower left corner of the heat sink.
-
Three 6 mm Phillips from around the fan.
-
One 7.5 mm Phillips at the top right corner of the heat sink.
-
One 4 mm nut from the side of the heat sink.
-
Two 4 mm screw nuts with attached springs from either side of the heat sink.
Ваш вклад лицензируется под свободной лицензией Creative Commons .