Перейти к основному содержанию

Smontaggio iPhone 5s

Английский
Итальянский
Шаг 5
iPhone 5s Teardown: шаг 0, изображение 1 из 3 iPhone 5s Teardown: шаг 0, изображение 2 из 3 iPhone 5s Teardown: шаг 0, изображение 3 из 3
  • Our careful spudgering paid off. At the bottom of the phone, a cable connects the Touch ID sensor in the home button to the Lightning port assembly.

  • This adds a small element of danger to disassembly, as pulling too hard on the suction cup could cause accidental damage to the cable.

  • We survive this first booby trap and swiftly disconnect the Touch ID cable connector with the help of a spudger.

  • Alas, our first peek at the internal layout of the 5s. Comparing it to the iPhone 5, we spot very few differences, the main one being the lack of a battery removal pull-tab.

Il nostro lavoro di spudger ha pagato. Nella parte inferiore del telefono, c'è un cavo che connette il sensore Touch ID nel pulsante home al gruppo della porta Lightning.

Questa soluzione aggiunge un piccolo elemento di pericolo nello smontaggio, perché tirando troppo forte con la ventosa si può involontariamente danneggiare il cavo.

Sopravviviamo alla prima trappola mortale e stacchiamo subito il connettore del cavo del Touch ID con l'aiuto di uno spudger.

Ed ecco il nostro primo sguardo alla disposizione interna del 5s. Rispetto all'iPhone 5, notiamo differenze molto limitate, la principale è l'assenza di una linguetta per l'estrazione la batteria.

Ваш вклад лицензируется под свободной лицензией Creative Commons .