Перейти к основному содержанию

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 24 guides that include this step.

Английский
Французский
Шаг 3
Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac. The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board. The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.
  • Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

  • The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.

Débranchez le câble de synchronisation verticale de sa prise sur la carte de rétro-éclairage, près de l'angle supérieur gauche de l'iMac.

Le câble-ruban de synchronisation verticale a une extrémité de type ZIF, mais la prise ne possède ni dispositif de verrouillage ni volet de fixation. Tirez simplement le câble hors de sa prise vers le côté de l'iMac correspondant au lecteur optique pour le débrancher de la carte de rétro-éclairage.

Ваш вклад лицензируется под свободной лицензией Creative Commons.