Перейти к основному содержанию

iPhone 16 Pro Max Logic Board tauschen

Английский
Немецкий

Требования для руководства

Все предварительные руководства должны быть переведены до того, как этот перевод будет считаться завершённым.

Pentalobe-Schrauben entfernen

Plektrum mit einer 3 mm-Tiefenmarkierung versehen

iPhone 16 Pro Max Glasrückseite tauschen

iPhone 16 Pro Max Logic Board tauschen

iPhone 16 Pro Max Turning Point Prereq

iPhone 16 Pro Max Logic Board tauschen

Wie du den Klebstoff deines iPhone Rückglases ersetzt.

How to Seal Your iPhone With Books

Pentalobe-Schrauben entfernen

Информационный справочник

= Готово = Не завершен
    This guide shows how to remove and replace the logic board for your iPhone 16 Pro Max.
    The logic board has connectors on its top and below itself. Because of how it's designed,bottom, so you may not be able to fully reconnect the screen connector underneath the logic board during reassembly. If that's the case, [link|https://www.ifixit.com/Guide/iPhone+16+Pro+Max+Screen+Replacement/178634|you'll need to [guide|178634|remove the screen|new_window=true] to accesscomplete the connectorrepair. This procedure will attempt to connect the logic board without removing the screen first. If you remove the screen, you'll also need screen adhesive.
    You'll need replacement back glass adhesive to complete this repair.
    After your repair, calibrate authentic Apple replacement components using [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      ***To reassemble your iPhone, [guide|159598|follow this guide|new_window=true] to reapply adhesive and install your back glass.***

      After your repair, calibrate a genuine replacement partparts [link|https://support.apple.com/en-us/120579|using Apple's Repair Assistant|new_window=true]. Navigate to Settings ***→*** General ***→*** About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone_16_Pro_Max|Answers community] for help.

      Шаги руководства

      Ваш вклад лицензируется под свободной лицензией Creative Commons .