Перейти к основному содержанию

Cómo reemplazar el adhesivo del vidrio trasero de tu iPhone

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 13 руководства, которые включают этот шаг.

Английский
Испанский
Шаг 9
iPhone 16 Pro Max Back Glass Installation: шаг 0, изображение 1 из 3 iPhone 16 Pro Max Back Glass Installation: шаг 0, изображение 2 из 3 iPhone 16 Pro Max Back Glass Installation: шаг 0, изображение 3 из 3
  • Use a spudger or your fingers to lift the pull tab connected to the large front liner. The pull tab is often in a corner of the liner.

  • Use the pull tab to peel off the large front liner from the adhesive.

  • At this point, you may still have liner covering the perimeter, which prevents the adhesive from accidentally sticking to anything while you're reassembling your iPhone. Don't remove these small release liners just yet.

Utiliza la pequeña pestaña en la esquina superior derecha para quitar el revestimiento adhesivo rosa.

-[title] Remove the adhesive liner
-[* black] Use the small pull tab in the top right corner to remove the pink adhesive liner.
+[* black] Use a spudger or your fingers to lift the pull tab connected to the large front liner. The pull tab is often in a corner of the liner.
+[* black] Use the pull tab to peel off the large front liner from the adhesive.
+[* icon_note] At this point, you may still have liner covering the perimeter, which prevents the adhesive from accidentally sticking to anything while you're reassembling your iPhone. ***Don't remove these small release liners just yet.***

Ваш вклад лицензируется под свободной лицензией Creative Commons .