Почините Свои Вещи Сообщество Магазин

Comment changer l'adhésif pour vitre arrière iPhone

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 13 руководства, которые включают этот шаг.

Назад к руководству
Английский
Французский
Шаг 12
iPhone 16 Pro Max Back Glass Installation, Connect the battery: шаг 0, изображение 1 из 1
Connect the battery

  • Use your finger or a spudger to press and connect the battery press connector onto the logic board.

  • This is a good point to test your repair before sealing up your iPhone. Power on your iPhone and make sure it works as expected. Power it back down and continue reassembly.

  • If your iPhone doesn't turn on, connect it to a power source and try again.

  • If you've replaced the logic board and the screen fails to turn on, you'll need to follow the screen guide to manually connect the display connector.

Connecter la batterie iPhone

Utilisez l’extrémité plate de votre spatule ou votre doigt pour reconnecter la batterie.

Accrochez le cache du connecteur de la batterie à son emplacement sur la carte mère.

Utilisez votre tournevis Tri-Point Y000 pour mettre les vis et fixer le cache.

Allumez votre iPhone et testez-le pour vous assurer que tout fonctionne avant de le sceller. Éteignez-le à nouveau avant de terminer cette réparation.

[title] Connect the battery
-[* black] Use the flat end of your spudger or your finger to reconnect the battery.
-[* black] Hook the battery connector cover onto its slot on the logic board.
-[* black] Use your tri-point Y000 driver to install the screws and secure the cover.
-[* black] Power on your iPhone and test it to make sure everything works before sealing it up. Power it back down before finishing this repair.
+[* black] Use your finger or a spudger to press and connect the battery press connector onto the logic board.
+[* icon_note] ***This is a good point to test your repair before sealing up your iPhone. ***Power on your iPhone and make sure it works as expected. Power it back down and continue reassembly.
+ [* icon_note] If your iPhone doesn't turn on, connect it to a power source and try again.
+ [* icon_note] If you've replaced the logic board and the screen fails to turn on, you'll need to follow the [guide|178634|screen guide|new_window=true] to manually connect the display connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons .