Почините Свои Вещи Сообщество Магазин

iPhone 14 및 15 후면 유리 접착제 교체 방법

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 13 руководства, которые включают этот шаг.

Назад к руководству
Английский
Корейский
Шаг 12
iPhone 16 Pro Max Back Glass Installation, Connect the battery: шаг 0, изображение 1 из 1
Connect the battery

  • Use your finger or a spudger to press and connect the battery press connector onto the logic board.

  • This is a good point to test your repair before sealing up your iPhone. Power on your iPhone and make sure it works as expected. Power it back down and continue reassembly.

  • If your iPhone doesn't turn on, connect it to a power source and try again.

  • If you've replaced the logic board and the screen fails to turn on, you'll need to follow the screen guide to manually connect the display connector.

배터리 연결하기

스퍼저의 납작한 끝이나 손가락을 사용하여 배터리를 다시 연결하세요.

배터리 커넥터 커버를 로직 보드의 슬롯에 끼우세요.

3점 Y000 드라이버를 사용하여 나사를 조이고 커버를 고정하세요.

iPhone의 전원을 켜고 테스트하여 모든 것이 작동하는지 확인한 후 봉하세요. 이 수리를 완료하기 전에 전원을 다시 끄세요.

[title] Connect the battery
-[* black] Use the flat end of your spudger or your finger to reconnect the battery.
-[* black] Hook the battery connector cover onto its slot on the logic board.
-[* black] Use your tri-point Y000 driver to install the screws and secure the cover.
-[* black] Power on your iPhone and test it to make sure everything works before sealing it up. Power it back down before finishing this repair.
+[* black] Use your finger or a spudger to press and connect the battery press connector onto the logic board.
+[* icon_note] ***This is a good point to test your repair before sealing up your iPhone. ***Power on your iPhone and make sure it works as expected. Power it back down and continue reassembly.
+ [* icon_note] If your iPhone doesn't turn on, connect it to a power source and try again.
+ [* icon_note] If you've replaced the logic board and the screen fails to turn on, you'll need to follow the [guide|178634|screen guide|new_window=true] to manually connect the display connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons .