Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Английский
Испанский
Step 14
Use a plastic opening tool or a fingernail to disconnect the front-facing camera and sensor cable connector. Be sure to only pry up on the connector, and not on the socket on the logic board.
Disconnecting the front panel assembly cables
  • Use a plastic opening tool or a fingernail to disconnect the front-facing camera and sensor cable connector.

  • Be sure to only pry up on the connector, and not on the socket on the logic board.

Usa una herramienta de apertura de plástico o una uña para desconectar la cámara y el conector del cable del sensor.

Asegúrate de que solo empujas el conector y no el enchufe de la placa lógica.

Ваш вклад лицензируется под свободной лицензией Creative Commons.