Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Английский
Французский
Шаг 3
Carefully de-solder the black, grey, white, and orange leads (boxed in red) from the side of the circuit board near the AF lamp. Lightly heat the joint of each lead with a soldering iron as you apply slight tension to the wire with a pair of tweezers. Do not excessively heat the board. Also, be sure not to accidentally melt the plastic case with the side of the soldering iron.
  • Carefully de-solder the black, grey, white, and orange leads (boxed in red) from the side of the circuit board near the AF lamp.

  • Lightly heat the joint of each lead with a soldering iron as you apply slight tension to the wire with a pair of tweezers.

  • Do not excessively heat the board. Also, be sure not to accidentally melt the plastic case with the side of the soldering iron.

  • Repeat the process until all four leads are de-soldered.

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.