Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Английский
Итальянский

Translating step 1

Step 1
Remove the two 1.5 mm Phillips #000 screws securing the rear-facing camera to the rear case.
  • Remove the two 1.5 mm Phillips #000 screws securing the rear-facing camera to the rear case.

Svita le due viti a croce Phillips #000 da 1,5 mm che fissano la fotocamera posteriore al case posteriore.

Ваш вклад лицензируется под свободной лицензией Creative Commons.